|
PLASTOMERIC BITUMEN MEMBRANES
APP (plastomeric)
membranes are membranes for waterproofing
in which bitumen is modified with plastomer-type polymers (non-tactile polypropylene). Mixtures of this type possess expressed
plastic characteristics which make them suitable for all applications, especially in cases in which heat and UV-ray resistance
are very important factors. APP membranes are specially marked for applications as final
membranes.
Mineral self-protection with natural shale or protective paint (REFLEXFIM) prolongs life-time of the
membrane and its resistance to thermal ageing.
FIMPLAST V3 V4
SRPS U.M3.231
FIMPLAST V3, V4 are plastomeric membranes for waterproofing and therefore possess better steadiness to cold and heat than classic bitumen
membranes,
as well as good UV-stability. Reinforced glass voal is used as insert, which ensures optimal dimensional stability to the product. |
FIMPLAST PV3 PV4
FIMPLAST PV3, PV4 APP membranes for waterproofing are made on short-fibrous polyester
(PV) insert reinforced with glass voal strands. Such insert unifies good mechanical
characteristics of polyester and dimensional stability of glass voal.
FIMPLAST bitumen membranes can be manufactured with surface protection of natural shale
(Š) which are used as final, self-protective membranes for inaccessible roofs.
|
|
Characteristic |
Unit |
FIMPLAST V3 |
FIMPLAST V4 |
FIMPLAST PV3 |
FIMPLAST PV4 |
|
Length |
m |
10 |
7,5 |
10 |
7,5 |
|
Width |
cm |
100 |
100 |
100 |
100 |
|
Mass per unit area |
g/m² |
2.700 |
3.800 |
2.700 |
3.800 |
|
Binder content |
g/m² |
2.000 |
2.800 |
2.000 |
2.800 |
|
Thickness |
mm |
2,3 |
3,3 |
2,4 |
3,4 |
|
Tensile strength |
longitudinal |
N/5
cm |
300 |
350 |
400 |
400 |
| transversal |
N/5
cm |
200 |
250 |
300 |
300 |
| Elongation at break |
longitudinal |
% |
2 |
2 |
35 |
35 |
| transversal |
% |
2 |
2 |
35 |
35 |
|
Flow resistence at elevated temperature |
ºC |
+100 |
+100 |
+100 |
+100 |
|
Flexibility at low temperature |
ºC |
+0 |
+0 |
+0 |
+0 |
|
   |
|
